Siemens 1FT6 Servo Motor Repairs
Servo Lab Capabilities
We have documented 96 different Servo Manufacturer repair reports in our Database
We repair AC Servos, DC Servos, AC Spindles, and AC Actuators
Capable of 24-hour repairs in many cases
We have thousands of spare and rebuilt motors in our inventory for parts or exchange motorsServo Lab Repair Procedures
-
Data
Motor nameplate data is recorded
-
Inspection
A visual inspection of any damage to the motor.
We check for- Damaged Leads/Terminals
- Worn output shaft/keyways
- Cracks in end bells or covers
-
Job Ticket
We complete to full write up off all motor data
Including- All winding tests (Resistance, Meg Ω, Continuity)
- All bearing sizes
- All seal sizes
- Brake torque tests (Record Torque, winding resistance)
- Feedback Tests (Tachometer/Encoder)
-
Motor Disassembly
- Bearing and seal sizes are recorded
- Bearing fits are measured on shaft and End bell
- Brake torque is measured as well as resistance and Meg Ω
- More winding tests are performed (Surge and HiPOT tests)
- Stator is then washed and baked in oven
- Magnets are inspected for cracks or if loose on shaft
- Encoder is tested with either (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Assembly
- New bearings are installed
- New seals are installed
- If required, new windings are impregnated
- Brakes are rebuilt or replaced depending on manufacturer design.
- Rebuilt or New encoders are installed and aligned using:
- (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Rotor Balancing and Testing
- Rotor is run through a full vibration diagnostic
-
Run Testing
- Every Motor is Run for a minimum of 1 hour using one of our drives.
- We use Siemens S110, S120, IndraDrive, AB Kinetix 300, Yaskawa 7, and AMC drives
-
Service Report
- A Final 3-page Service Report is filled out
- Pinout diagram for power and feedback is provided
- Brake torque is recorded a final time for our Service Reports
- A photo of nameplate and motor is attached
- A motor tag is installed on motor with QR code linking Service Report and Job Histories
- If requested, a YouTube link is attached to the service report of motor
Siemens 1FT6 Motors
A&C Electric Siemens servo motor repair specialists have performed over 10,000 Siemens repair jobs and have more than 1,6000 servo motors in stock, including Siemens 1FT6 motors. Whether you’re looking to repair your current model or need to buy a new unit, A&C Electric is your solution for Siemens 1FT6 servo motor problems.
Our technicians know Siemens motors inside and out. When you send us your 1FT6 motor model the first thing we do is dismantle, clean, and inspect the unit. This way we catch all damaged components early so we can provide a complete repair. We use Siemens OEM parts if any replacements are needed.
Siemens Repair Job Warranty
Our servo motor repair jobs are backed up by a two year warranty. A servo service report shows some of our past work with Siemens servo motor repairs.
We also have some refurbished Siemens motors on hand if you can't wait for repairs. The models we carry include those from the 1FK7 and 1PL6 series. Exchange your broken unit or buy online.
From basic Siemens 1FT6 motor repairs or full unit replacement, contact A&C Electric is your one stop for expert service.
Contact A&C Electric for information in Siemens 1FT6 servo motor repair services.
